ONV launches the H53000 Series Gigabit Easy Managed PoE Switches, covering multiple specifications from 4-port PoE to 24-port PoE:

u ONV-H53054PFDM: 4*Gigabit PoE ports + 1*Gigabit RJ45 uplink port + 1*SFP fiber port, built-in 65W power supply;

u ONV-H53064PFDM: 4*Gigabit PoE ports + 2*Gigabit RJ45 uplink ports + 1*SFP fiber port, built-in 65W power supply;

u -ONV-H53108PFDM: 8*Gigabit PoE ports + 2*Gigabit RJ45 uplink ports + 1*SFP fiber port, built-in 100W power supply;

u ONV-H53016PFDM: 16*Gigabit PoE ports + 2*Gigabit RJ45 uplink ports + 1*SFP fiber port, built-in 250W power supply;

u ONV-H53024PFDM: 24*Gigabit PoE ports + 2*Gigabit RJ45 uplink ports + 1*SFP fiber port, built-in 250W power supply.

The key words for this series are: Gigabit access, 30W per-port PoE, Easy Managed lightweight management, and cloud platform and mobile APP O&M.

1. Gigabit Ports for Higher-Bandwidth Access

Unlike the 100M access of the H51000 series, the PoE ports of the H53000 series all support 10/100/1000Base-T auto-sensing. This means the access side is no longer limited by 100M bandwidth, making it more suitable for the following terminals:

u Wi-Fi 6/6E wireless APs;

u High-resolution IP cameras;

u Video conferencing terminals;

u Smart devices requiring Gigabit access;

u PoE terminals that may require bandwidth upgrades in the future.

The uplink side also provides a combination of Gigabit RJ45 and SFP fiber ports. Taking the ONV-H53024PFDM as an example, it provides 24 Gigabit PoE ports, 2 Gigabit RJ45 uplink ports, and 1 Gigabit SFP fiber port, with a switching capacity of 54Gbps, a forwarding rate of 40.18Mpps, an 8K MAC address table, 4M buffer memory, and 15K jumbo frames. For multi-channel HD video and multi-terminal concurrent access, this switching capability is more comfortable.

The ONV-H53016PFDM provides 16 Gigabit PoE ports, with a switching capacity of 38Gbps, a forwarding rate of 28.27Mpps, 4K MAC, and 2M buffer memory, suitable for medium-scale full-Gigabit PoE access.

2. 30W PoE per Port, Covering Various Powered Devices

All PoE ports in the H53000 series support the IEEE 802.3af/at standard, with a maximum output power of 30W per port. The switch can automatically detect and identify standards-compliant powered devices and supply power over Ethernet cables without damaging non-PoE devices.

PoE management capabilities include:

u Querying of PoE port faults

u Remote on/off of each PoE port

u Display of port PoE operating status

u Visualized PoE power supply control via the ONV-NMS cloud platform and mobile APP.

For devices such as wireless APs, IP cameras, VoIP phones, and video intercoms, this integrated "data + power" access method can reduce independent power cabling and lower construction complexity.

3. Easy Managed: Lightweight but Practical Network Management

The H53000 series supports Web management, the ONV-NMS cloud management platform, and mobile APP O&M management. Management functions include:

u Loop protection

u DHCP Snooping

u Static port aggregation

u Port-based bidirectional data mirroring

u Real-time fault alarms and fault location

u Remote upgrade, remote reboot, and factory reset

u Port-based IEEE 802.1Q VLAN, supporting 4K VLANs

u IGMP Snooping v1/v2, supporting up to 256 multicast groups

u Broadcast storm control, port isolation, and port rate limiting

u Cable status check, Web management, and one-key recovery

u IP settings, account management, port traffic settings, and system information display;

u Diff-Serv QoS, priority marking/remark, 802.1p/DSCP priority mapping, and 8 output queues per port

In addition, the series supports RSTP (< 50ms) to enhance link redundancy and network reliability, reduce fiber splicing requirements, decrease the number of network nodes, and improve deployment efficiency. In the event of a unidirectional network failure, the switch can rapidly restore communication, ensuring uninterrupted transmission of critical data.

For projects that require VLAN partitioning, loop protection, QoS, and remote O&M but do not need complex Layer 3 management, the H53000 series provides a set of "sufficient and practical" management capabilities.

4. Hardware and Reliability Design

The H53000 series adopts a built-in power supply design with an input voltage of AC100-240V, 50/60Hz. Power consumption and power supply specifications vary by model:

u ONV-H53054PFDM/ONV-H53064PFDM: built-in 65W power supply, standby power consumption <5W, full load <65W;

u ONV-H53108PFDM: built-in 100W power supply;

u ONV-H53016PFDM/ONV-H53024PFDM: built-in 250W power supply, standby power consumption <15W, full load <250W.

In terms of physical specifications, the small models measure 200*130*40mm, while the 16-port and 24-port models measure 350*215*44mm, all supporting desktop and wall-mount installation. The operating temperature is -20°C to +55°C, storage temperature is -40°C to +80°C, and operating humidity is 5%–90% RH non-condensing.

In terms of protection and certification, the series supports 4KV 8/20us lightning protection, has an IP30 protection level, and is certified by CE, FCC, and RoHS. The products come with a 1-year warranty and lifelong maintenance.

5. Typical Application Scenarios

The H53000 series is suitable for scenarios with high requirements for both bandwidth and PoE power supply:

u Wi-Fi 6/6E wireless coverage: Provides Gigabit PoE access for high-bandwidth wireless APs

u Video conferencing and voice: Provides data and power for video conferencing terminals and VoIP phones

u HD video surveillance: Full Gigabit access for multiple HD IP cameras, avoiding 100M access becoming a video backhaul bottleneck

u Small-to-medium-sized campus and commercial networks: Uses SFP fiber ports for long-distance uplinks to build full-Gigabit PoE access networks

u High-density PoE deployment: 16-port and 24-port models are suitable for hotels, campuses, factory dormitories, and other places requiring centralized PoE power supply

Conclusion

The core advantages of the ONV-H53000 series are: full Gigabit access, 30W PoE per port, lightweight management, and cloud platform and mobile APP O&M. It is suitable for PoE projects that need to provide higher bandwidth on the access side while retaining VLAN, QoS, loop protection, and remote O&M capabilities. For scenarios such as HD surveillance, Wi-Fi 6 coverage, and video conferencing, the H53000 series provides a more scalable choice than 100M access.